<aside> 💡 NOTE: Each node is automatically set to logging every 1 minute. If you wish to change to ten minutes follow this step. Elsewise proceed to step 2.
</aside>
Measurements can be taken every 1 minute or every 10 minutes. This can be changed by the user.
To change the measurement frequency, take a PH0 screwdriver, and unscrew the screws at the back of the nodes.
There is a switch inside the node-housing which can be alternated between 1 min and 10 mins. Flick this switch to change frequency.
Opening of the Node-Housing
Change the Frequency of Measurements by alternating the Switch circled above